Media Teak MT3333 Chipset, 33 tracking/ 99 acquisition-channel GPS/GLONASS receiver
Ultra-high Sensitivity, -165dBm, TCXO Design
G top Firmware Customization Services
GPS+GLONSS Consumption current (3.3V)
Acquisition for GPS+GLONASS: 35mA Typical
Tracking for GPS+GLONASS: 29mA Typical
E911, Rosh Compliance
DGPS (QZSS/WAAS/EGNOS/MASA/GAGAN*)
GAGAN will be supported.
|
Pin name |
Pin number |
Mark on PCB |
Description |
Comment |
|
GND |
4 |
G |
Ground |
|
|
VCC |
3 |
V |
Supply voltage |
3.0-6.0V,5.0V is recommended |
|
TX0 |
2 |
T |
Transmit Data |
TTL Series data Output |
|
RX0 |
1 |
R |
Receives Data |
TTL Series data Input |
|
ENABLE |
0 |
E |
Shutdown the module |
High active, or keep floating for normal working |
|
1PPS |
5 |
P |
Time Mark Output |
2.8V CMOS Level |
|
VBACKUP |
6 |
B |
Backup power input for RTC & navigation data keep |
The voltage should be kept between 2.0V~4.3V, Typical 3.0V. |
